Commander 4WD V6-3.7L VIN K (2007)
Front Crankshaft Seal: Service and Repair
Installation
INSTALLATION
CAUTION: To prevent severe damage to the Crankshaft, Damper or Special Tool 8512, thoroughly clean the damper bore and the crankshaft
nose before installing Damper.
1. Using Special Tool 8348 (2) and 8512 (3) , install crankshaft front seal.
2. Install vibration damper.
3. Install radiator cooling fan and shroud.
4. Install upper radiator hose.
5. Install A/C compressor and tighten fasteners to 54 Nm (40 ft. lbs.).
6. Install accessory drive belt.
7. Refill cooling system.
8. Connect negative cable to battery.