Commander 4WD V6-3.7L VIN K (2007)
4. Position the rear floor distribution duct (3) into the vehicle and connect it to the rear of the HVAC air distribution housing (4).
5. Position the left rear floor duct (1) and right rear floor duct (2) into the vehicle and engage the retainers that secure the floor ducts to the floor
support.
6. Connect the rear floor ducts to the rear floor distribution duct.
7. Install the carpet onto the front floor panel and under the instrument panel.
8. Position the gear selector (3) to its installed location on the floor panel (6) and securely install the retaining screws (5).
9. Connect the front console duct (2) to the air distribution housing (4) and engage the retainer (1) to the gear selector.
10. Install the front seats.
11. Install the floor console duct.
12. Install the floor console.