Commander 4WD V6-3.7L VIN K (2007)
1. Using a trim stick or another suitable wide flat-blade tool (1), gently pry between the top of the upper rear air outlet bezel (2) and the quarter
interior trim panel (3) to release the retainer clips that secure the top of the bezel to the trim panel.
2. Roll the top of the upper rear air outlet bezel downward to disengage the retainer clips that secure the bottom of the bezel to the trim panel and
remove the air outlet bezels as necessary.
3. Using a trim stick or another suitable wide flat-blade tool (1), release the three retaining clips (2) that secure each upper rear air outlet (4) to the
rear outlet bezel (3) and remove the air outlets as necessary.
Installation
INSTALLATION
NOTE: Make sure that the foam seal on the air outlet is not damaged.
1. Align the upper rear air outlets (1) with the openings of the rear upper air duct and install the air outlets into the upper rear air outlet bezel (2) as
necessary. Make sure that each of the air outlet's three retaining clips (3) are fully engaged to the bezel.
