Commander 4WD V6-3.7L VIN K (2007)
NOTE: LHD model with 5.7L engine shown. RHD model and other engines similar.
1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system.
3. Remove the air cleaner housing, air intake tube and the resonator.
4. Remove the nut (3) that secures the A/C suction line (2) and the A/C liquid line (10) to the A/C expansion valve (1).
5. Disconnect the A/C suction line from the A/C expansion valve and remove and discard the O-ring seal.
6. Remove the nut (1) that secures the A/C liquid line (2) to the A/C receiver/drier (3).
7. Disconnect the A/C liquid line from the A/C receiver/drier and remove and discard the dual plane seal.