Commander 4WD V6-3.7L VIN K (2007)
9. Disconnect the left rear floor duct (1) and the right rear floor duct (2) from the rear floor distribution duct (3).
10. Disconnect the rear floor distribution duct from the air distribution housing (4) and remove the distribution duct.
11. Disconnect the right front floor duct (5) and the left front floor duct (6) from the air distribution housing and remove the floor ducts.
12. Remove the nut (1) that secures the HVAC housing assembly (2) to the passenger side of the dash panel (3).
13. Disconnect the A/C liquid line and the A/C suction line from the A/C evaporator.
14. Disconnect the heater hoses from the heater core tubes.
15. Remove the two bolts (1) that secure the HVAC housing assembly (2) to the engine compartment side of the dash panel (3).