Commander 4WD V6-3.7L VIN K (2007)
-
Service Park Assist System Warning - On vehicles equipped with the optional park assist system, the EMIC transducer will generate one short
chime each time the SERVICE PARK ASSIST SYSTEM textual message is displayed in the reconfigurable display of the instrument cluster.
This warning indicates a failure condition has been monitored affecting the operation of the park assist system related components or circuits.
-
Service Tire Pressure Monitor System Warning - On vehicles equipped with an optional base or premium Tire Pressure Monitor (TPM)
system, the EMIC transducer will generate one short chime each time a SERVICE TIRE PRESS. SYSTEM textual message is displayed in the
reconfigurable display of the instrument cluster. This warning indicates a failure condition has been monitored affecting the operation of the tire
pressure monitor system related components or circuits.
-
Tire Pressure Monitor Warning - On vehicles equipped with an optional base or premium Tire Pressure Monitor (TPM) system, the EMIC
transducer will generate one short chime each time a LOW PRESSURE textual message is displayed in the reconfigurable display of the
instrument cluster. This warning indicates that a low pressure condition has been monitored in one of the tires on or in the vehicle.
-
Trans Overtemp Warning - The EMIC transducer will generate one short chime each time the TRANSMISSION OVER TEMP textual
message is displayed in the reconfigurable display of the instrument cluster. This warning indicates that the fluid temperature in the automatic
transmission is excessive. This chime will repeat each time the trans overtemp message is cycled from OFF to ON.
-
Turn Signal/Hazard Warning Flasher Emulation - The EMIC relay will generate repetitive clicks at a slow rate to emulate an
electromechanical flasher when the turn signal or hazard warning system are operating. The EMIC relay will generate repetitive clicks at a fast rate
to indicate that the right or left turn signal are operating with one or more bulbs ineffective. In either case, the clicks will continue until the turn
signal and hazard warning systems are turned OFF.
-
Turn Signal On Warning - The EMIC transducer will generate one short chime and a TURN SIGNAL ON textual message with a blinking right
or left turn signal icon are displayed in the reconfigurable display of the instrument cluster. This warning indicates that a turn signal has been
active continuously for 1.6 kilometers (1 mile) with the vehicle speed greater than 22 kilometers-per-hour (15 miles-per hour). The hazard
warning flashers will not activate this chime feature.
The EMIC provides chime service for all available features in the chime warning system, except for the audible warning function provided by each of the
optional park assist system display modules. The EMIC relies upon its internal programming, numerous hard wired inputs, and electronic message inputs
received from other modules over the CAN data bus network to provide the chime warning system features. The internal programming of the EMIC
determines the priority of each chime request input that is received, as well as the rate and duration of each chime that is to be generated.
The hard wired circuits between components related to the chime warning system may be diagnosed using conventional diagnostic tools and procedures.
Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of
wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds.
However, conventional diagnostic methods will not prove conclusive in the diagnosis of the chime warning system or the electronic controls or
communication between modules and other devices that provide some features of the chime warning system. The most reliable, efficient, and accurate
means to diagnose the chime warning system or the electronic controls and communication related to chime warning system operation requires the use of
a diagnostic scan tool. Refer to the appropriate diagnostic information.
