Commander 4WD V6-3.7L VIN K (2007)
Body Control Module: Service and Repair
Installation
DOOR (MEMORY) MODULE INSTALLATION
1. Position module on door trim panel and install fasteners.
2. If applicable, first connect the black 12-way electrical connector (3), then connect the brown 20-way electrical connector (2). Then connect the
black 10-way electrical connector to the module (1).
3. Install the door trim panel, See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
4. Connect the battery negative cable.