Commander 4WD V6-3.7L VIN K (2007)
EGR Control Solenoid: Service and Repair
Removal - 3.7L
REMOVAL - 3.7L
The electronic EGR valve and solenoid assembly (1) is attached to the rear of the left cylinder head.
An exhaust gas routing tube (1) connects the EGR valve (4) to the intake manifold.
1. Remove two tube mounting bolts (2).
2. Remove tube (1) from solenoid (4). Slip opposite end of tube (6) from intake manifold.
3. Remove gasket (3) located between EGR valve solenoid and tube flange.
