Commander 4WD V6-3.7L VIN K (2007)
EGR Control Solenoid: Service and Repair
Installation - 3.7L
INSTALLATION - 3.7L
1. Clean gasket area (1) at rear of left cylinder head where it joins base of EGR valve.
2. Clean EGR tube where it joins EGR valve.
3. Position new gasket between EGR valve and cylinder head.
4. Position EGR valve to cylinder head. Install and tighten two bolts (2). Torque to 9 Nm (80 in. lbs.).
