Commander 4WD V6-3.7L VIN K (2007)
3. Using a trim stick or another suitable wide flat-bladed tool, carefully pry the seat belt escutcheon (2) upward far enough to disengage the barrel
clips that secure it to the top of the second row center seat back (1).
4. Slide the seat belt webbing (3) through the slot (4) in the escutcheon to remove the escutcheon from the belt.
5. Remove the trim from the back and the top of the second row center seat back frame.
6. Pull the foam seat back cushion (2) away from the front upper right corner of the center seat back frame far enough to access and remove the two
screws (1) that secure the retractor shield (3) to the seat back frame.
7. Remove the retractor shield from the seat back frame.
8. Remove the screw (3) from the back of the center seat back frame (2) that secures the retractor.
9. Remove the second row center seat belt and retractor unit through the opening in the front upper right corner of the seat back frame.
Second Row Outboard
SECOND ROW OUTBOARD
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
