Commander 4WD V6-3.7L VIN K (2007)
2. Remove the lower suspension arm nut (2) and bolt (1) from the axle bracket.
3. Remove the nut (1) and bolt (8) from the frame rail and remove the lower suspension arm (9).
Left Side
LEFT SIDE
NOTE: All torques should be done with vehicle on the ground with full vehicle weight.
1. Position the lower suspension arm (9) in the frame rail.
2. Install the frame rail bracket bolt (8) and nut (1) tighten to 176 Nm (130 ft. lbs.).
