Commander 4WD V6-3.7L VIN K (2007)
NOTE: A total of 12 valve balls are located in the valve body, four made from plastic (4) and eight from steel (1, 3).
6. Install all check balls (1, 3, 4) and the central strainer (2).
7. Install the strainer (1) in the inlet to torque converter lock-up control solenoid valve.
8. Position the sealing plate (3) onto the valve body (4).
9. Install the valve housing (2) onto the valve body (4) and sealing plate (3).
10. Install the shift plate Torx(R) bolts (1). Tighten the bolts to 8 Nm (71 in.lbs.).
11. Install leaf spring (5).
12. Install the strainers (1) for the modulating pressure and shift pressure control solenoid valves into the valve housing.
