Commander 4WD V6-3.7L VIN K (2007)
Window Track: Service and Repair
Door - Front
Removal
REMOVAL
1. Remove the outside rearview mirror.
2. Remove the front door glass.
3. Remove the weatherstrip from the front glass run channel.
4. Remove the nut (2) that secures the top of the front glass run channel (1) to the inside door panel.
5. Loosen the nut (3) that secures the bottom of the run channel to the keyed hole on the inside door panel.
6. Lift the front glass run channel upward within the door far enough to disengage the nut that secures the bottom of the run channel to the keyed hole
on the inside door panel.
7. Remove the front glass run channel from the door.
Installation
INSTALLATION