Commander 4WD V8-4.7L (2008)
Front Door Window Regulator: Service and Repair
Front Door Window Regulator - Removal
REMOVAL
1. Remove the watershield See: Front Door Panel/Service and Repair/Front Door Watershield/Removal.
2. Temporarily install the window switch and position the glass (2) fully up to gain access to the glass clamp screws (3).
3. Loosen the bolt in each of the window regulator glass clamps just far enough to release the door glass from the clamps. Do not completely remove.
4. Tape the glass securely into place.
5. Remove the mid-conduit clip and door harness clip prior to regulator removal.
6. Remove the bolts (1 and 3) that secure the window regulator rails to the inside of the door.
