Commander 4WD V8-4.7L (2008)
1. Using a trim stick C-4755 or equivalent, release the retaining clips that secure the header trim molding in the liftgate opening and remove.
Header Molding - Installation
INSTALLATION
1. Align the retaining tabs on the upper liftgate trim molding with the retaining clips in the liftgate opening and engage the retaining tabs that secure
the trim molding to the liftgate opening.
Load Floor - Removal
REMOVAL
1. Remove the liftgate scuff plate, See: Scuff Plate/Service and Repair/Liftgate Sill Scuff Plate - Removal.
2. Remove the two nuts that secure the load floor to the floor panel.
3. Remove the load floor.
Load Floor - Installation
INSTALLATION
