Commander 4WD V8-4.7L (2008)
6. Insert the upper tabs of the turning loop trim cover into the slots of the height adjuster on the upper b-pillar, then lower the bottom of the cover and
use hand pressure to press firmly and evenly on the cover until it snaps into place.
C-Pillar Trim Panel-Removal
REMOVAL
1. Fold and tumble the second row outboard seat (4) forward against the front seat for easiest access to the seat belt lower anchor and the C-pillar
trim.
2. Loosen the bolt (3) that secures the second row outboard seat belt lower anchor (2) and the seat latch striker bracket to the rear floor panel.
3. Disengage the lower anchor from the loosened seat latch striker bracket bolt.