Commander 4WD V8-4.7L (2008)
7. Remove the four axle flange nuts (1).
8. Remove the axle shaft (1) from the rear differential See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle
Shaft/Service and Repair/Rear Axle - C213R/Removal.
9. Remove the shoe to shoe return spring (6) with needle nose pliers & then remove the adjuster (5).
10. Remove the shoe to shoe return spring (3) with brake pliers.
11. Remove shoe hold-down clips (4) and pins. Clip is held in place by pin which fits in clip notch. To remove clip, first push clip ends together and
slide clip until head of pin clears narrow part of notch. Then remove clip (4) and pin.
12. Remove shoes (1) off the actuator lever (2) for the park brake then remove the shoes (1).