Commander 4WD V8-4.7L (2008)
8. Starting at the outside working inward, loosen the camshaft bearing cap retaining bolts 1/2 turn at a time. Repeat until all load is off the bearing
caps.
CAUTION: DO NOT STAMP OR STRIKE THE CAMSHAFT BEARING CAPS. SEVERE DAMAGE WILL OCCUR TO THE
BEARING CAPS.
NOTE: When the camshaft is removed the rocker arms may slide downward, mark the rocker arms before removing camshaft.
9. Remove the camshaft bearing caps and the camshaft.
Camshaft - Right
REMOVAL
1. Remove the cylinder head covers (1) See: Cylinder Head Assembly/Valve Cover/Service and Repair/Removal and Replacement/Cylinder Head
Cover - Removal.
