Commander 4WD V8-4.7L (2008)
Drive Belt Tensioner: Service and Repair
Accessory Drive Belt Tensioner - Installation
4.7L
1. An indexing slot is located on back of tensioner. Align this slot to the head of the bolt on the front cover. Install the mounting bolt. Tighten bolt to
41 Nm (30 ft. lbs.).
2. Install drive belt See: Drive Belt/Service and Repair/Accessory Drive Belt - Installation.
3. Check belt indexing marks See: Drive Belt/Service and Repair/Accessory Drive Belt - Installation.
4. Install air filter housing.