Commander 4WD V8-4.7L (2008)
Air Register: Service and Repair
Air Outlets - Installation
Front Distribution
INSTALLATION
NOTE: Make sure that the air outlet is properly aligned to the instrument panel duct and that the foam seal on the outlet is not damaged.
1. Align the instrument panel air outlets (1) to the openings of the instrument panel ducts and install the air outlets into the instrument panel bezel (2)
as necessary. Make sure that each of the air outlet's three retaining clips (3) are fully engaged to the instrument panel bezel.
2. Install the instrument panel bezel onto the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Instrument Panel Bezel - Installation.
Rear Distribution
INSTALLATION
NOTE: Make sure that the foam seal on the air outlet is not damaged.
1. Align the upper rear air outlets (1) with the openings of the rear upper air duct and install the air outlets into the upper rear air outlet bezel (2) as
necessary. Make sure that each of the air outlet's three retaining clips (3) are fully engaged to the bezel.