Commander 4WD V8-4.7L (2008)
Evaporator Core: Service and Repair
Front A/C Evaporator - Removal
REMOVAL
1. Remove the HVAC housing .
2. Disassemble the HVAC housing as necessary to access the A/C evaporator (1) See: Housing Assembly HVAC/Service and
Repair/Overhaul/Disassembly.
3. Open the rubber seal (1) and carefully lift the A/C evaporator (2) and insulator (3) out of the lower half of the HVAC housing (4).
4. If required, remove the rubber seal from the lower half of the HVAC housing. If the seal is deformed or damaged, it must be replaced.
5. If required, remove the insulator from the A/C evaporator. If the insulator is deformed or damaged, it must be replaced.
