Commander 4WD V8-4.7L (2008)
16. Carefully separate the left half of the air distribution housing (1) from the right half of the air distribution housing (2).
17. Remove the center partition (3) from the distribution housing.
NOTE: If the seal on any air door is deformed or damaged, the air door must be replaced.
18. If required, remove the front floor air doors (1 and 3) from the center partition (2) by disengaging the retaining tabs (4) and pulling the air doors
apart from each other.
NOTE: If the seal on any air door is deformed or damaged, the air door must be replaced.
19. Remove the upper defrost/panel-air door (1), lower defrost/panel-air door (2), directional vane (3), rear outlet-air door (4) and the blend-air door
(5) from the right side air distribution housing (6) as required.
