Commander 4WD V8-4.7L (2008)
7. Install speed sensors (2) in axle tube (1) flange.
8. Coat new axle flange plug with Mopar(R) Stud N' Bearing Mount Adhesive or equivalent and install plug with freeze plug installer.
9. Install calipers and rotors.
7. Install speed sensors (2) in axle tube (1) flange.
8. Coat new axle flange plug with Mopar(R) Stud N' Bearing Mount Adhesive or equivalent and install plug with freeze plug installer.
9. Install calipers and rotors.