Commander 4WD V8-4.7L (2008)
3. Using Holder C-3281 (1), install the rear companion flange (2) nut. Tighten the bolts to 122-176 Nm (90-130 ft.lbs.).
4. Install the rear propeller shaft. See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Propeller Shaft - Removal
5. Check the transfer case fluid level. See: Service and Repair/Procedures Correct as necessary.
