Commander 4WD V8-4.7L (2008)
saddle-like formations on each lower side wall of the receptacle.
2. Using hand pressure, press the nozzle nipple (4) upward firmly and evenly into the receptacle until the integral latch feature (2) is fully engaged on
the back of the CHMSL lens.
3. Reconnect the rear washer supply hose to the barbed nipple of the nozzle.
4. Reinstall the CHMSL onto the liftgate outer panel. See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair/Center High
Mounted Stop Lamp - Installation.
5. Reconnect the battery negative cable.
