Commander 4WD V8-4.7L Flex Fuel (2009)
Upper
INSTALLATION
1. Position the upper b-pillar trim panel (1) to the b-pillar and engage the lower retaining tabs (2) that secure the trim panel to the lower b-pillar trim.
2. Rotate the top part of the trim panel into position and install the screw.
CAUTION: The upper trim plug must be removed and discarded to gain access to the upper retaining screw before attempting to remove the
trim panel. Failure to remove the trim screw may result in damage to the trim panel or the retaining clip.
3. Install a new trim plug (1) into the trim panel (2).