Commander 4WD V8-4.7L Flex Fuel (2009)
Seat Back: Service and Repair
Front Seat Adjuster - Removal
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Service Precautions
2. Remove the seat cushion as necessary. See: Seat Cover/Service and Repair/Seat Cushion Cover - Removal
Power
1. Remove the seat risers. See: Service and Repair/Seat Riser - Removal
2. Remove the bolts and nuts (2 AND 4) and separate the height adjuster assembly from the length adjuster assembly (3).
NOTE: Bolt (4) is a different size from the other three bolts (2). Note the location for proper installation.
WARNING: A seat structure that has seen significant load may have the locking mechanism activated and may exhibit the following symptoms:
-
Locking pawl (2) loose
-
Locking pawl (2) engaged into the seat frame side member (1)
-
Height adjuster only works on outboard side
-
Broken or missing shear pin (3)
If any of above symptoms exist, replace the height adjuster assembly. Do not attempt any repairs. Failure to follow these instructions may result
in possible serious or fatal injury.
If any one or more of these symptoms exist replace the height adjuster assembly. Do not attempt any repairs. Failure to follow these
instructions may result in personal injury or death.
Manual
