jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Temperature Gauge - Description|Page 2469 > < Coolant Low Indicator - Description|Page 2464
Page 1
background image

Temperature Gauge: Description and Operation
Temperature Gauge - Description

DESCRIPTION

An engine coolant temperature gauge is standard equipment on all instrument clusters. This gauge is located on the right side of the instrument cluster,
just right of the tachometer. The gauge consists of a movable gauge needle or pointer controlled by the instrument cluster circuitry and a fixed 90 degree
gauge scale on the cluster overlay that reads left-to-right from C (or Cold) to H (or Hot). An International Control and Display Symbol icon for Engine
Coolant Temperature
 is located on the cluster overlay, directly above the hub of the gauge needle.

On all vehicles the engine coolant temperature gauge graphics are gray and white against a black field except for two red graduations at the high end of
the gauge scale.

In all base vehicles, the gauge graphics are clearly visible within the instrument cluster in daylight. When illuminated from behind by the panel lamps
dimmer controlled cluster illumination lighting with the exterior lamps turned ON, the white text and graphics still appear white, the gray graphics still
appear gray and the red graphics still appear red. The red gauge needle has internal optical illumination. Gauge illumination is provided by Light
Emitting Diode (LED) units soldered onto the instrument cluster electronic circuit board.

In all Limited and Overland vehicles, the gauge graphics are nearly invisible within the instrument cluster in daylight while the ignition switch is in the
OFF position. When the ignition is turned ON the gauge is illuminated from behind at full brightness by the cluster illumination lighting. The white text
and graphics still appear white, the gray graphics still appear gray and the red graphics still appear red. The white gauge needle has internal optical
illumination. With the exterior lamps turned ON, the cluster illumination lighting is panel lamps dimmer controlled. Gauge illumination is provided by
LED units soldered onto the instrument cluster electronic circuit board.

The engine coolant temperature gauge is serviced as a unit with the instrument cluster.

Temperature Gauge - Description|Page 2469 > < Coolant Low Indicator - Description|Page 2464