jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Engine Lubrication > < Engine Mount Insulator - Removal|Page 2185

Commander 4WD V8-4.7L Flex Fuel (2009)

Page 2
background image

INSTALLATION

1. Install the engine mount (1).
2. Tighten the bolts to 30 Nm ( 22 ft.lbs.).
3. Lower the engine.
4. Install the through bolts and nuts. 
5. Lower vehicle.
6. Connect negative battery cable.

Engine Lubrication > < Engine Mount Insulator - Removal|Page 2185