Commander 4WD V8-4.7L Flex Fuel (2009)
Engine Oil: Description and Operation
ENGINE OIL - GASOLINE ENGINES
WARNING: New or used engine oil can be irritating to the skin. Avoid prolonged or repeated skin contact with engine oil. Contaminants in
used engine oil, caused by internal combustion, can be hazardous to your health. Thoroughly wash exposed skin with soap and
water. Do not wash skin with gasoline, diesel fuel, thinner, or solvents, health problems can result. Do not pollute, dispose of used
engine oil properly. Contact your dealer or government agency for location of collection center in your area.
When service is required, Chrysler Corporation recommends that only Mopar(R) brand parts, lubricants and chemicals be used. Mopar(R) provides the
best engineered products for servicing Chrysler Corporation vehicles.
Only lubricants bearing designations defined by the following organization should be used.
-
Society of Automotive Engineers (SAE)
-
American Petroleum Institute (API)
-
National Lubricating Grease Institute (NLGI)
-
Association des Constructeurs Europeens d' Automobiles (European Automobile Manufacturers Association) (ACEA)
API SERVICE GRADE CERTIFIED
Use an engine oil that is API Certified. MOPAR(R) provides engine oils, that meet or exceed this requirement.
SAE VISCOSITY
An SAE viscosity grade is used to specify the viscosity of engine oil. Use only engine oils with multiple viscosities such as 5W-20 or 5W-30. These are
specified with a dual SAE viscosity grade which indicates the cold-to-hot temperature viscosity range. Vehicles with 5.7L engines equipped with
Multiple Displacement System, (MDS), must use SAE 5W-20 oil. Failure to do so may result in improper operation of the Multiple
Displacement System (MDS).These engine oils improve low temperature starting and vehicle fuel economy. Refer to your engine oil filler cap
for the recommended engine oil viscosity for your vehicle.
ACEA Categories
For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the requirements of ACEA A1/B1, A2/B2, or
A3/B3.
ENERGY CONSERVING OIL
An Energy Conserving type oil is recommended for gasoline engines. The designation of ENERGY CONSERVING is located on the label of an engine
oil container.
CONTAINER IDENTIFICATION
