Commander 4WD V8-4.7L Flex Fuel (2009)
17. Connect the heater hoses from the heater core tubes in the engine compartment.
CAUTION: Use caution when connecting, disconnecting or repositioning any wiring harness. Damage could occur to the wiring harness due to
vehicle millage, vehicle age and environmental conditions.
18. Connect the upper right side engine harness.
19. Install the coolant recovery bottle (1) See: Cooling System/Coolant Reservoir/Service and Repair/Coolant Recovery Bottle - Installation
20. Install the air box assembly (2)
21. Fill the cooling system See: Cooling System/Service and Repair
22. Connect the negative battery cable.
