Commander 4WD V8-4.7L Flex Fuel (2009)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Front Ambient Temperature Sensor - Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the grille See: Body and Frame/Grille/Service and Repair/Grille - Removal.
3. Disconnect the wire harness connector (1) from the ambient air temperature sensor (2) located at the top of the front bumper beam (3).
4. Disengage the ambient air temperature sensor from the retaining tabs (4) and remove the sensor.