Commander 4WD V8-4.7L Flex Fuel (2009)
Blower Motor Relay: Service and Repair
Rear Blower Motor Relay - Removal
REMOVAL
NOTE: Illustration shown with junction block (JB) removed from instrument panel for clarity.
1. Disconnect and isolate the negative battery cable.
2. Remove the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Removal.
3. Reach up into the instrument panel and remove the rear blower motor relay (2) from the top inside corner of the junction block (JB) located
outboard of the steering column.
