Commander 4WD V8-4.7L Flex Fuel (2009)
NOTE: Take proper precautions to protect the carpeting from engine coolant. Have absorbent toweling readily available to clean up any
spills.
9. Remove the bolt (7) that secures the heater tubes to the heater core (8).
10. Disconnect the heater core tubes from the heater core and remove and discard the O-ring seals.
11. Install plugs in, or tape over the opened heater core ports.
12. Carefully pull the heater core out of the HVAC air distribution housing.
13. If required, remove the heater core tubes from the vehicle.
