Commander 4WD V8-4.7L Flex Fuel (2009)
Courtesy Lamp Bulb: Service and Repair
Courtesy Lamp Bulb - Removal
Courtesy Lamp
BULB
WARNING: To avoid serious or fatal injury on vehicles equipped with airbags, disable the Supplemental Restraint System (SRS) before
attempting any steering wheel, steering column, airbag, seat belt tensioner, impact sensor, or instrument panel component
diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the system capacitor to
discharge before performing further diagnosis or service. This is the only sure way to disable the SRS. Failure to take the proper
precautions could result in accidental airbag deployment.
1. Disconnect and isolate the battery negative cable.
2. Support the courtesy lamp housing (1) with one hand while grasping the flange on the outer circumference of the lens (3) with the other hand, then
pull the lens straight down to unsnap it from the housing.
3. Pull the base of the bulb (2) straight out of the socket in the courtesy lamp housing (1).
Liftgate Lamp
BULB
