Commander 4WD V8-4.7L Flex Fuel (2009)
Fuse Block: Description and Operation
Power Distribution Center (PDC) - Operation
OPERATION
All of the current from the battery and the generator output enters the PDC through two cables and a single two-holed eyelet that is secured with nuts to
the two PDC B(+) terminal studs just inside the front end of the PDC housing. The PDC cover is unlatched and opened to access the battery and
generator output connection B(+) terminal studs, the fuses or the relays. Internal connection of all of the PDC circuits is accomplished by an intricate
combination of hard wiring and bus bars.
For complete circuit diagrams, refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and
connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness
connectors, splices and grounds.
