Commander 4WD V8-4.7L Flex Fuel (2009)
Hose/Line HVAC: Description and Operation
A/C Liquid Line - Description
Front
DESCRIPTION
NOTE: LHD model shown. RHD model similar.
The A/C liquid line (1) is the refrigerant line that carries refrigerant from the receiver/drier to the A/C expansion valve (2). The A/C liquid is serviced in
one section and is secured to the right side frame (3) rail by two plastic retainer clips (4).
NOTE: Replacement of the refrigerant line O-ring seals and gaskets is required anytime a refrigerant line is opened. Failure to replace the
rubber O-ring seals and metal gaskets could result in a refrigerant system leak.
The A/C liquid line has no serviceable parts except the O-ring seals and gaskets. The O-ring seals used on the connections are made from a special type
of rubber not affected by R-134a refrigerant. The O-ring seals and gaskets must be replaced whenever the A/C liquid line is removed.
The A/C liquid line cannot be repaired and must be replaced if found to be leaking or damaged.
Rear
DESCRIPTION
NOTE: 4.7L engine shown. Other engines similar.
The A/C liquid line (1) is the refrigerant line that carries refrigerant from the receiver/drier (5) to the A/C expansion valve (2). The liquid line is retained
