Commander 4WD V8-4.7L Flex Fuel (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Hose - Removal
Pressure Hose - Gear to Pump
PRESSURE HOSE - GEAR TO PUMP
1. Siphon the power steering fluid from the reservoir.
2. Disconnect the pressure line (2) at the pump (1).
3. Disconnect the pressure line (2) at the gear (7).
4. Remove the three mounting brackets (6) for the pressure line at the engine cradle.
5. Remove the pressure line (2) from the vehicle.
Return Hose - Pump to Cooler
RETURN HOSE - PUMP TO COOLER