Commander 4WD V8-4.7L Flex Fuel (2009)
Wheel Fastener: Service and Repair
Wheel Stud - Removal
Front
FRONT WHEEL STUD
CAUTION: Do not use a hammer to remove wheel studs.
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove brake caliper, caliper adapter and rotor,See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Brake Rotor - Removal.
4. Remove stud (2) from hub with Remover C-4150A (1).
Rear
REAR WHEEL STUD
CAUTION: Do not use a hammer to remove wheel studs.
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
