Commander 4WD V8-4.7L Flex Fuel (2009)
11. Install the EGR valve assembly retaining bolts (1) and tighten to 9 Nm (80 in. lbs.).
12. Connect the EGR valve solenoid electrical connector (1).
13. Connect the fuel line to the fuel rail.
14. Connect the power brake booster vacuum hose (1) and the vapor canister purge hose (2) at the intake manifold.
15. Install the throttle body resonator.
16. Connect the negative battery cable.
17. Using a diagnostic scan tool, erase any previously recorded DTC's.
