Commander 4WD V8-4.7L Flex Fuel (2009)
Transmission Position Switch/Sensor: Service and Repair
Transmission Solenoid and TRS Assembly - Removal
REMOVAL
NOTE: If the Transmission Solenoid/TRS Assembly is being replaced, the Quick Learn Procedure must be performed. See: Computers and
Control Systems/Testing and Inspection/Programming and Relearning/TCM Quick Learn
1. Remove the valve body from the transmission. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/Valve Body - Removal
2. Remove the bolts (1) holding the transmission solenoid/TRS assembly onto the valve body.
3. Separate the transmission solenoid/TRS assembly from the valve body.
