Commander 4WD V8-4.7L Flex Fuel (2009)
Door Module: Service and Repair
Door Module - Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel - Removal.
3. First disconnect the black 10-way electrical connector (1), then the brown 20-way electrical connector (2). If applicable, next disconnect the black
12-way electrical connector (3) from the module.
4. Remove fasteners and module from vehicle.
