Commander 4WD V8-4.7L Flex Fuel (2009)
Blower Motor Relay: Service and Repair
Rear Blower Motor Relay - Installation
INSTALLATION
1. Position the rear blower motor relay (2) into the proper receptacle of the junction block (JB) (1) located in the passenger compartment.
2. Align the blower motor relay terminals with the terminal cavities in the JB receptacle and push down firmly on the relay until the terminals are
fully seated.
3. Install the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Installation.
4. Reconnect the negative battery cable.