Commander 4WD V8-4.7L Flex Fuel (2009)
NOTE: Third row seat belt and retractor units are only present on vehicles equipped with an optional third row seat.
1. Remove the third row seat from the vehicle.
2. Remove the screw (5) that secures the seat belt lower anchor (4) to the outboard rear corner of the third row seat support bracket (1).
3. Remove the two screws (4) that secure the seat belt escutcheon (1) to the top of the third row seat back (5).
4. Slide the seat belt webbing (2) through the slot (3) in the escutcheon to remove the escutcheon from the belt.
5. Remove the trim from the back and the top of the third row seat back frame.
6. Remove the through bolt (1) that secures the retainer bracket (2) to the top of the retractor pocket (4) on the front upper outboard corner of the seat
