Commander 4WD V8-4.7L Flex Fuel (2009)
20. Raise the vehicle on a hoist, See: Maintenance/Vehicle Lifting/Service and Repair.
21. Remove the bolt (5) that secures the battery negative cable ground eyelet terminal (6) to the engine block (10).
22. Remove the nut (4) that secures the battery positive cable eyelet terminal (3) to the B(+) terminal stud on the starter solenoid.
23. Remove the battery positive cable eyelet terminal from the B(+) terminal stud on the starter solenoid.
24. Disconnect the battery wire harness connector (2) from the connector receptacle on the starter solenoid.
25. Remove the battery wire harness retaining clips (7) AND (9) from the engine.
26. Remove the battery wire harness from the engine compartment.
