Commander 4WD V8-4.7L Flex Fuel (2009)
7. Remove 2 front horizontal generator mounting bolts (1).
8. Remove generator from vehicle.
5.7L
WARNING: Disconnect the negative cable from the battery before removing the battery output wire (B+ wire) from the generator. Failure to
do so can result in injury or damage to the electrical system.
1. Disconnect negative battery cable at battery.
2. Remove generator drive belt.
3. Unsnap plastic insulator cap from B+ output terminal.
4. Remove B+ terminal mounting nut at rear of generator. Disconnect terminal from generator.
5. Disconnect field wire connector (3) at rear of generator by pushing on connector tab.
6. Remove 2 generator mounting bolts (1).
7. Remove generator (2) from vehicle.
