Commander 4WD V8-4.7L Flex Fuel (2009)
Power Steering Fluid Cooler: Service and Repair
Power Steering Cooler - Installation
3.7L AND 4.7L
1. Position and install the power steering cooler (2) with hoses (1AND3) to the vehicle.
2. Snap cooler on the a/c condenser (2).
3. Reconnect the steering gear return line (3) from the gear to the cooler.
4. Reconnect the reservoir return hose (5) to the cooler.
5. Refill the power steering fluid and bleed the system,See: Service and Repair/Power Steering System Bleeding.
6. Start engine and check for leaks.
