Commander 4WD V8-4.7L Flex Fuel (2009)
9. Remove the outer tie rod end retaining nut.
10. Separate the outer tie rod end (3) from the steering knuckle using special tool 8677(5). See: Steering/Tie Rod/Tie Rod End/Service and
Repair/Removal and Replacement/Tie Rod End - Removal.
11. Remove the lower ball joint nut.
12. Separate the lower ball joint from the knuckle (1) using tool C-4150A (2).
13. Remove the upper ball joint nut.
14. Separate the upper ball joint (2) from the knuckle (3) using tool 8677 (1).