Commander 4WD V8-4.7L Flex Fuel (2009)
Liftgate Window Glass: Service and Repair
Flip-Up Glass Latch - Installation
INSTALLATION
NOTE: Grand Cherokee (WK) shown, Commander (XK) similar.
1. Position the latch (3) into the inside of the liftgate and align using the marks made during removal.
2. Install and tighten the three bolts (2). Tighten the bolts to 12 Nm (9 ft. lbs.).
3. Connect electrical connectors (1) to the latch (3).
4. Check and adjust the glass position, if necessary.
5. Install the trim panel. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and
Repair/Liftgate Trim Panel - Installation
6. Connect the battery negative cable.
