Commander 4WD V8-4.7L Flex Fuel (2009)
Rear Door Window Glass: Service and Repair
Rear Door Glass - Installation
INSTALLATION
1. Carefully lower the door glass into the rear door through the window opening.
2. Rotate the door glass into position and engage it to the window regulator glass clamps.
3. Using the regulator (2), move the rear door glass to full up.
4. Tighten the bolts in each of the window regulator glass clamps to 12 Nm (105 in. lbs.).
5. Install the glass run channel See: Window Track/Service and Repair/Rear Door Glass Channel - Installation.
6. Install the watershield onto the inside of the rear door See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service
and Repair/Watershield - Installation.
7. Position and seat the inner belt molding fully.
